Alexander 107 "A" valve?

More
04 十二 2018 19:38 #1748 by George Lawler
Alexander 107 "A" valve? was created by George Lawler
Hello,

I have recently acquired an Alexander 107 (used) horn.

It has a stopping valve that has two parts. I have read that removing the extension piece will put the horn in "A".

I have played a Conn 8D for many years so horn in F or B flat are what I understand. I have no idea how, or why to use an A horn.

I was in an automobile accident and haven't been able to hold a horn for over 20 years. I was able to play again three years ago. The come back is coming along nicely. The 107 is easy to hold and demands less effort than the Conn... but that A horn is a mystery.

Is there a fingering chart available for it? When/why would you want to play a horn in A? Any information about how/when to best use the A horn will be very welcome!

Thank you,
George Lawler
(Amateur hornist struggling with a come back.)

Please 登入 or Create an account to join the conversation.

More
08 十二 2018 19:29 #1750 by Dan Phillips
Replied by Dan Phillips on topic Alexander 107 "A" valve?
The main use for it is to enable reading parts for horn in E without transposing. It can also make some other transpositions easier, for example, reading horn in H as horn in C.

Please 登入 or Create an account to join the conversation.

More
09 十二 2018 17:39 - 09 十二 2018 17:40 #1751 by Chris Crawley
Replied by Chris Crawley on topic Alexander 107 "A" valve?
Hi George -

The A valve can be seriously useful on the Bb horn - the only place it's used. It puts the horn down a semitone, just the same as your second valve. You now have a lot of alternative fingerings. For example, if you need to play a bottom Bb, you can get somewhere near with all four valves depressed; better, if you know you won't need the A valve for anything else, is to pull the slide out a bit and get the bottom Bb in tune so you don't have to bend it.

Fingerings for passages involving rapid changes between C# and D midway up the treble clef can tricky; with the A valve you can finger the C# as 1 and 2 plus A valve and the D as 1 plus A valve - much easier.

You may find that the G# at the top of the clef is well in tune if played on the A valve pushed right in - if so, it will be more secure than 2 plus 3.

You need to experiment a bit for yourself.
Last edit: 09 十二 2018 17:40 by Chris Crawley.
The following user(s) said Thank You: George Lawler

Please 登入 or Create an account to join the conversation.

Time to create page: 0.388 seconds

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies).

You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.

Ok